Where to find the model number on a Suburban caravan hot water system
Suburban hot water systems sold in Australia carry a model and serial plate on the front of the heater. You can read it from outside the van by opening the hot water service door.
What each line on the plate means
Model No.
SW + size + feature letters + A (Australian market), e.g. SW6DERA.
On the plate: SW6DERA
Serial No.
Unit serial. Needed for parts orders and for recall checks.
Part numbers (parts list)
Suburban asks for the Part Number, not the Item No. (the callout number on the drawing), when you order.
Where the plate is
Front of the heater, beside the burner opening (behind the outside door)
Open the outside access door. Suburban's parts drawings put the MODEL & SERIAL NO. PLATE on the front face of the heater housing, to the right of the burner tube.
Suburban document, page 10. Open the PDF
Same position on DRA/DFA (gas-only) and DERA/DEFA (gas/electric) models
Figures 12 and 13 show the plate in the same place on both versions.
Suburban document, page 10. Open the PDF
Can't find or read the plate?
- Open the outside door and clean the front of the heater housing gently. The plate is on the face beside the burner.
- Check whether there is a 240 V switch inside the van (E model) and whether the outside door is hinged with rounded corners (R) or flush-fitting (F).
- Measure the outside door frame and note the tank size from the caravan specification.
- Send us a photo of the outside door, open and closed.
Questions people ask
Numbers that look alike
- SW4 vs SW6The 4 and 6 are tank sizes (about 15 L and 20 L in the current DRA range). Tanks, doors and some fittings differ.
- Letters after the size: E, R, FE = 240 V electric element as well as gas; R = radius-corner hinged door; F = flush-mount frame and door. An SW6DERA and an SW6DEFA differ only in door type, but the door parts are not interchangeable.
- Australian A models vs US modelsAustralian Suburban codes end in A (SW6DEA, SW6DERA). US codes such as SW6DE have different gas and electrical standards. Do not use US parts lists for AU heaters.
- Recalled earlier models (SW6PA, SW6DEA, SW6DA, SW4DEA, SW4DA, SW4DECA, SW6DECA)These models had a carbon-monoxide recall. Check your serial number against the recall ranges before using the heater on gas.
Is my Suburban hot water system part of the recall?
Check the model and serial number on the plate. ACCC recall PRA 2019/17885 covers SW6PA, SW6DEA, SW6DA, SW4DEA, SW4DA, SW4DECA and SW6DECA heaters with serials 181315552-193002648 (some ending in D) or 8183311827-8190201139, made April 2018 to August 2019. If yours is affected, do not use it in gas mode. Contact Coast to Coast for the free replacement.
What is the difference between DRA and DERA?
The E means the DERA also has a 240 V electric element. The DRA is gas-only.
Which number do I give when ordering a part?
The part number from the parts list, plus your heater's model and serial number. The small item number on the drawing is not a part number.
Where this comes from
- Suburban SW4/SW6 DRA, DERA, DFA, DEFA gas hot water storage heater - operating, installation and service manual (AU, 205951)
- Product Safety Australia recall PRA 2019/17885 - Suburban RV water heaters SW6PA, SW6DEA, SW6DA, SW4DEA, SW4DA, SW4DECA, SW6DECA
- Suburban SW6D, SW6DE, SW6DM, SW6DEM installation and operation manual (US)
We don't invent model numbers. Everything above is from Suburban's own documents.