SparePartsMatcher

Where to find the model number on a Truma hot water system

Truma's Australian storage hot water systems carry a data label on top of the tank, plus a duplicate. The models are close cousins of European Truma boilers, but they run at Australian gas pressure, so the code on the label matters.

What each line on the plate means

  1. Model

    UltraRapid Gas = BGA 14, UltraRapid Gas/Electric = BGEA 14 (from 01/2022).

    On the plate: BGEA 14

  2. Serial number

    Truma asks for the serial number and year of manufacture with every spare-parts order.

  3. Year of manufacture

    Needed with the serial for parts.

  4. Gas pressure

    AU units: 2.75 kPa (propane). The supply must match the plate.

    On the plate: 2.75 kPa

Where the plate is

  • Top of the water heater

    The UltraRapid data label is on the top of the water heater. It is a double plate with a removable barcode.

    Truma document, page 3. Open the PDF

  • Duplicate plate in a visible place

    If the original cannot be read after installation, the duplicate must be stuck somewhere clearly visible. Check the cupboard wall around the heater.

    Truma document, page 3. Open the PDF

Can't find or read the plate?

  1. Open the cupboard or access panel above the heater and look on top of the tank.
  2. Look for the duplicate plate on the surrounding cabinetry.
  3. From outside, note the cowl colour (cream or black) and whether there is a 240 V switch on the control panel (BGEA).
  4. Send us photos of the cowl and the control panel.
Send us a photo instead

Questions people ask

Numbers that look alike
  • BGA 14 vs BGEA 14The E means a 230/240 V electric element is fitted as well as gas. Element and thermostat parts apply only to the BGEA.
  • UltraRapid vs older UltrastoreThe Ultrastore Rapide GE (UGE 10) is an earlier Truma storage heater named in Truma's type-approval papers. The UltraRapid models start from 01/2022. Read the model on the label.
  • Australian UltraRapid vs European Boiler BG 10 / BGE 10The EU boilers run at 30 mbar and the AU UltraRapid at 2.75 kPa. Gas parts are regional, so do not cross-apply them.
What details does Truma need to supply hot water system parts?

The serial number and the year of manufacture from the data label, plus the model (BGA 14 or BGEA 14).

Where this comes from

We don't invent model numbers. Everything above is from Truma's own documents.