SparePartsMatcher

Aircommand air conditioner

Aircommand SANDPIPER air conditioner parts

Every part for your air conditioner, checked against Aircommand's own parts lists.

Parts for your SANDPIPER.

Tap a part to see its price and where to buy it.

Showing 8 of 10 parts

See all 10 parts

A code on the display?

8 fault codes for the SANDPIPER, from Aircommand's own documents. Tap one to see what to check.

E1Return-air (room) temperature sensor fault.

Likely cause: Sensor unplugged, damaged lead or failed sensor.

Aircommand's checks, in order: Contact Aircommand Australia or an authorised service agent.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

E2Inside coil temperature sensor fault.

Likely cause: Sensor unplugged, damaged lead or failed sensor.

Aircommand's checks, in order: Contact Aircommand Australia or an authorised service agent.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

E3Outside coil temperature sensor fault.

Likely cause: Sensor unplugged, damaged lead or failed sensor.

Aircommand's checks, in order: Contact Aircommand Australia or an authorised service agent.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

E4Inside coil is not cooling.

Likely cause: Compressor not running or low refrigerant.

Aircommand's checks, in order: Contact Aircommand Australia or an authorised service agent.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

E5Outside coil over temperature.

Likely cause: Condenser airflow blocked or condenser fan not running.

Aircommand's checks, in order: Contact Aircommand Australia or an authorised service agent.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

E15Communication error between control pad and main board.

Likely cause: Loose connection or failed control pad.

Aircommand's checks, in order: Check connections or replace the control pad; contact Aircommand Australia.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

Show all 8 codes

E18Ambient temperature sensor error.

Likely cause: Sensor or wiring fault.

Aircommand's checks, in order: Contact Aircommand Australia or an authorised service agent.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

E21Outdoor air temperature sensor error.

Likely cause: Sensor or wiring fault.

Aircommand's checks, in order: Contact Aircommand Australia or an authorised service agent.

Source: Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013), page 20. Open the PDF

Documents for the SANDPIPER2 documents from Aircommand
  • SANDPIPER spare parts listParts list · released 22 Nov 2016
  • Aircommand Sandpiper owners manual / installation guide (Rev 7, 28 May 2013)Manual · released 28 May 2013 · Open the PDF
Where these numbers come from

We don't invent part numbers. Every number on this page is copied from Aircommand's documents listed above, with the page. If a document is in doubt we hold the part back and say so.

How we check a part fits

Not sure it's an SANDPIPER?

On a roof-top air conditioner it's on the ceiling unit inside: take off the return-air grille or lift out the filter and look up. Otherwise it's on the roof unit under the shroud.

How to read the plate All Aircommand models

All 10 parts for the SANDPIPER

Every part Aircommand's documents list for the SANDPIPER, grouped by area. Tap a part for its price, where to buy it and the page it came from.

Prices last seen between 27 Oct 2026 and 1 Nov 2026. Each price shows its own date. The shop's own page is final.

Electrical6 parts
Covers & fittings4 parts
  • Filter sandpiper

    Part no. 7001002Very likely fits your SANDPIPER

    Callout 2 · SANDPIPER spare parts list

    None in stock 2 shops list it · last seen 27 Oct

    Compare 2 shops
  • Shroud top foam sandpiper

    Part no. 7001006Very likely fits your SANDPIPER

    Callout 6 · SANDPIPER spare parts list

    No Australian stockist yet

  • Vent grill sandpiper/jabiru

    Part no. 6102092Very likely fits your SANDPIPER

    Callout 7 · SANDPIPER spare parts list

    No Australian stockist yet

  • Buckles and straps sandpiper

    Part no. 7001009Very likely fits your SANDPIPER

    Callout 9 · SANDPIPER spare parts list

    No Australian stockist yet

What the fit words mean
  • Very likely fits 10 parts. From the maker's documents for this model, with a condition or a caveat we explain on the part.

Why 10 parts here aren't marked "Fits": Listed against this model in the Airconditioner sandpiper parts list.

Parts shared across a range are often named after the first model they were made for, so a name may mention a different model. That doesn't mean it won't fit yours.

Is this my air conditioner?

Check the plate on your air conditioner says SANDPIPER.

MOD. NO.
SANDPIPER
Item or product code
7000001
SKU
9108400699

On a roof-top air conditioner it's on the ceiling unit inside: take off the return-air grille or lift out the filter and look up. Otherwise it's on the roof unit under the shroud.

Where's the plate on a Aircommand air conditioner?

Not your model? See all Aircommand models or ask us to find it.

Yes, show my parts