How to identify your Autoterm diesel heater
Autoterm (formerly sold as Planar) diesel heaters are named by type and output (AIR-2D = 2 kW air heater), and each one comes in a 12 V or a 24 V version. The voltage is part of the model, for example AIR-2D-12 or AIR-2D-24.
What each line on the plate means
Model
Heater type and output: AIR-2D, AIR-4D, AIR-8D, AIR-9D (air heaters) or FLOW-5D (liquid heater).
On the plate: AIR-2D
Rated voltage
12 V or 24 V. Autoterm treats these as separate models (AIR-2D-12 vs AIR-2D-24).
On the plate: AIR-2D-12
Serial number
Unit serial, needed for warranty.
Where the plate is
Duplicate label supplied in the kit
Autoterm kits include a duplicate of the heater label, so check where the installer stuck it (near the heater or on the manual).
Autoterm document, page 31. Open the PDF
Heater label on the casing
Autoterm's manuals do not state where the label sits on the heater. Look on the casing, then the controller and the paperwork.
Autoterm document. Open the PDF
Can't find or read the plate?
- Measure the hot-air outlet: 60 mm = AIR-2D, 90 mm = AIR-4D, 100 mm = AIR-9D.
- Check the supply: a 24 V truck or bus system almost always means a -24 model.
- Look for the duplicate label near the heater, under the bed, or on the manual.
- Send us a photo of the heater and its controller.
Questions people ask
Numbers that look alike
- 12 V vs 24 VSame heater name, different electrical versions. Voltage-specific parts (fuel pump, glow plug, controller wiring) must match.
- AIR-2D vs AIR-4D vs AIR-9D by outlet sizeAutoterm gives the first hot-air duct size as 60 mm for the AIR-2D, 90 mm for the AIR-4D and 100 mm for the AIR-9D. The outlet diameter is a quick physical check.
- Planar nameOlder heaters and documents use the Planar name (Planar repair manuals cover the AIR-2D/4D/8D/9D). Treat Planar 2D/4D as the same family, but give us the label details.
- AIR (air heater) vs FLOW (liquid/coolant heater)FLOW heaters heat coolant or water and have different pumps and parts.
Is a Planar heater the same as an Autoterm?
Autoterm is the current brand name for the heaters once sold as Planar, and the AIR-2D/4D/8D/9D names carry on. Parts still depend on the exact model and voltage.
How can I tell an AIR-2D from an AIR-4D?
Check the label, or measure the hot-air outlet: Autoterm specifies a 60 mm duct for the AIR-2D and 90 mm for the AIR-4D.
Models this guide covers1 model
Where this comes from
- AUTOTERM AIR-2D/4D/8D/9D user manual with installation instructions (EN v09.2026)
- AUTOTERM FLOW-5D / FLOW-5B / FLOW-14D user manual with installation instructions (EN v01.2024)
- AUTOTERM repair manual - air heaters AIR-2D/4D/8D/9D 12V/24V (EN v11.2017)
We don't invent model numbers. Everything above is from Autoterm's own documents.